scroll down

Olympus GIF-XP260N electronic gastroscope troubleshooting and repair

Release time:

2025-03-12 09:37

Machine Type:Olympus Electronic Gastroscope

Machine Model:GIF-XP260N

1. Malfunction Phenomenon

Abnormal Image

61e84ee618132cb90046d28b776a88be.png

2. Malfunction Detection

Check the tube for damage or destruction. The inserted tube has creases and aging. The internal angle wire is not in place; the bending rubber is aging; the CCD tip glass is damaged.

3. Malfunction Determination and Analysis
Long-term use causes aging of the insertion tube; the internal component angle wire is stretched, resulting in insufficient angle and inability to adjust; the residual tissue protein on the surface of the insertion tube is dehydrated and adhered to the outer skin during disinfection, and accumulates over time to form crystals, leading to damage of the CCD component.
4. Malfunction Handling
Overhaul. Replace the insertion tube; replace the CCD; replace the angle wire; replace the bending rubber.

5. On-Machine Effect After Repair 

805629fa04127110611f902c3efb5d4b.png

6. Endoscope Tips

 

After daily use
(1) After use, the endoscope should be strictly cleaned, disinfected, dried, and leak-tested according to the instructions to prolong its service life.
(2) After use, it should be immediately cleaned with cleaning solution, and the channel should be cleaned with a special cleaning brush before being placed in the soaking solution for soaking. At any time, the soft part of the endoscope should not be held or cleaned together with hard and sharp attachments. When cleaning, use clean and soft non-woven fabrics to prevent debris from contaminating the endoscope body.
(3) After cleaning, the endoscope should be blown dry, and the lens surface should be wiped clean in the same direction with lens paper to keep the lens clean and bright.
(4) Regularly leak-test the endoscope to prevent water ingress from causing imaging malfunctions.

 

 

 

 

 

 

 

 

 

 

This information is from the internet. Please contact us to delete it if there is any infringement.