Hot Searches: Color Doppler Ultrasound Probe Puncture Rack
Latest Products
Standard Procedure for Soft Lens Appearance Inspection
Release time:
2025-03-12 09:38
1. Confirm the model and serial number (the model is usually marked on the operating handle, S-cover, or light guide plug; the serial number is usually marked on the operating handle, eyepiece, or light guide plug); also confirm whether it is under warranty (soft endoscope minor repairs have no warranty period, except for special reasons, the warranty period is usually six months);
2. Use a magnifying glass to observe the condition of the CCD/image bundle objective lens cover glass, light beam cover glass, and C-cap at the distal end (confirm whether there is any dirt, cracks, or wear on the surface);
3. Observe whether the nozzle at the distal end is deformed, misaligned, or missing;
4. Observe whether the rubber at the bending part has any peeling, discoloration, or other aging phenomena, and whether there is any wear or defects in the rubber;
5. Observe whether the bending tube snakebone is flattened or deformed;
6. Observe whether there are any cracks, indentations, discoloration, corrosion, or wrinkles on the surface of the insertion tube;
7. Observe whether the conical sleeve at the insertion part is in good condition (whether there is any damage or aging relaxation);
8. Observe whether the forceps seat and suction seat are intact (whether there is any wear);
9. Observe whether the operating handle has any deformation or cracks;
10. Observe whether the control buttons have any damage, discoloration, or deformation;
11. Observe whether the eyepiece glass has any cracks or blurring;
12. Observe whether the light guide snake tube has any wrinkles, cracks, indentations, discoloration, or corrosion;
13. Observe whether the conical sleeves at both ends of the light guide snake tube are in good condition (whether there is any damage or aging relaxation);
14. Observe whether the light guide rod in the light guide plug rod is loose;
15. Observe whether the water bottle interface, suction interface, and S-terminal are rusty or deformed;
16. Observe whether the CCD electrical contact points have any oxidation, corrosion, or breakage.
This information comes from the internet. Please contact us to delete it if there is any infringement.
Previous Page
Contact Us
Room 618, 36 Gaoke Road, Tianhe District, Guangzhou, China
national unified free service hotline:400-020-6788
Copyright©2025 All Rights Reserved of Rencheng (Guangzhou) Medical Equipment Maintenance Co., Ltd.
