Hot Searches: Color Doppler Ultrasound Probe Puncture Rack
Latest Products
Ultrasonic probe—5P10 longitudinal wave straight probe
Release time:
2025-03-12 09:39
Ultrasonic straight probes are divided into single-crystal longitudinal wave straight probes and double-crystal longitudinal wave straight probes. The former consists of an ultrasonic piezoelectric ceramic chip, a shell, and a terminal, while the latter consists of two half-piezoelectric ceramic chips, also known as ultrasonic double-crystal probes.
Ultrasonic double-crystal probes consist of two piezoelectric ceramic chips, a shell, terminals, and a cable. One is responsible for transmitting and the other for receiving, allowing for more accurate measurements. They are widely used in ultrasonic thickness measurement. Ultrasonic double-crystal probes are further divided into ordinary probes, high-frequency narrow-pulse probes, and composite-chip double-crystal probes. Although they are all double-crystal probes, their Applications differ.
Ultrasonic straight probes are longitudinal wave probes, divided into longitudinal wave straight probes, soft membrane straight probes, and hard membrane straight probes. They all have an ultrasonic transducer that is responsible for both transmitting and receiving. Ordinary straight probes are more commonly used in ultrasonic flaw detection. Straight probes are also divided into ordinary probes and high-frequency narrow-pulse probes. Each has its own advantages, and the choice depends on the specific application.
This information is sourced from the internet. Please contact us for removal if there is any infringement.
Previous Page
Previous Page
Contact Us
Room 618, 36 Gaoke Road, Tianhe District, Guangzhou, China
national unified free service hotline:400-020-6788
Copyright©2025 All Rights Reserved of Rencheng (Guangzhou) Medical Equipment Maintenance Co., Ltd.
